HomeInternational | Contact Us Login / Register | My Cart (Cart is Empty)  

Viper "Pro Series II" 1000 Electric Drum Anchor Winch Kit

 
Product Details
 

Viper "Pro Series II" 1000 Electric Drum Anchor Winch Kit
Click over image to enlarge

Product ID
V2-bm30021
Vendor:
Manufacturer:
Bell Marine

Price
$1, 495.00 $1, 350.00
You Save
$145.00
Tax included

Shipping Price
$70.00
 
Share

Purchase

Rope Size :
Wiring Loom :
Quantity : 

Overview
Viper "Pro Series II" 1000 Electric Drum Anchor Winch Kit
Description
Viper "Pro Series II" 1000 Electric Drum Anchor Winch - WE CAN SHIP THESE TO YOUR DOOR AUSTRALIA WIDE.
 
NOW WITH A WORLD FIRST - 316 STAINLESS STEEL SUBMERSIBLE 1000W MOTOR!

The Viper Pro Series II has set new standards in anchoring systems. The new Viper 1000W electric motor (hand polished marine 316 grade stainless steel) has made it one of best selling anchor winch in Australia. With a fall rate of 45 meters per minute and a retrieval rate of over 41 meters per minute the Viper will ensure you get onto your GPS mark, first time, every time!

With unsurpassed Viper reliability, it has more torque than a conventional drum winch, 3 support bearings hugging a 28mm one  (1) piece solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum (preventing rope jams) and does not require any additional guards. With a life time warranty against water intrusion, and a bullet proof 5-year Viper performance warranty, you can’t go past a Viper. Now supplied with everything you need to install it, including a 5mm stainless steel sandwich plate, all required stainless steel bolts/screws/nylocs/washers, 2 face plates depending on your dash space and even your rope chain and even swivel are included.

All you have to add is your own cabling or one of our custom made Bell Marine tinned copper marine wiring looms, you will never have to break your back pulling up your anchor and chain again!

Please note: 3B&S cables are already attached to our motor and leak tested, so there is no need to remove end caps that are not sealed properly!

Take the Viper Challenge today! 

  • 28mm Solid S/S Shaft With 3 Support Bearings
  • 8mm Marine Grade 316 Plate S/S Hand Polished to a Mirror Finish
  • Viper Powder Coated Aluminum Worm Drive Gear Box
  • 360 Degree Motor Rotation with 16 Different Positions
  • Max fall rate: 45mtrs per minute
  • Max Retrieval rate: 41 mtrs per minute
  • Suit Vessel Length: 5.7 mtrs +
  • Max Load: 195kgs
  • Max Holding Capacity: 1900 kgs
  • Weight: 15 kgs (winch only)
  • Well Clearance Required: Width 410mm x depth 410mm x height 260mm

 


INCLUDES:
  1. 100AMP CIRCUIT BREAKER
  2. MARINE GRADE 200AMP ANCHOR SOLENOID
  3. UP/DOWN LED SWITCH WITH FACE PLATE
  4. plus COMBO CIRCUIT BREAKER & SWITCH COMBO FACE PLATE
  5. 75MTRS OF 8MM POLYESTER BLEND 3 STRAND ROPE
  6. (0PTIONAL 100MTRS OF 6MM DOUBLE BRAID ROPE)
  7. 8MTRS OF 6MM SHORTLINK GAL CHAIN
  8. DELUXE ANCHOR ROLLER
  9. STAINLESS STEEL ANCHOR SWIVEL
  10. 5MM STAINLESS STEEL SANDWICH PLATE
  11. ALL FIXING HARDWARE
  12. 5 YEAR WARRANTY WINCH WARRANTY
  13. LIFETIME WATER INTRUSION WARRANTY
  14. INSTALLATION INSTRUCTIONS
 
Box Dimensions 
Winch box             49x49x34cm    20kgs
Rope & Chain box  25x25x25cm    9kg 
 
BEWARE OF IMITATIONS! 
THE VIPER WINCH IS A STAINLESS STEEL SEALED ELECTRIC MOTOR - NOT A STAINLESS AND PLASTIC COVER OVER A STEEL ELECTRIC MOTORS
 
We also offer a custom made wiring loom to suit this Viper Pro Series 11 1000 Winch.
 
PLEASE NOTE: These wiring looms are NOT included in the winch kit price.
Our new Plug and Play wiring looms come ready to install into your boat.

Every loom is hand made from marine tinned wire and every connection and terminal is fully sealed using only the very best hardware available.
To do this we need to know all of the measurements outlined in the document below.
Once you send us those measurements we can then send you the price for your custom made wiring loom.


Why Custom Make Your Wiring Loom ?

Electric winches draw a lot of power when running.
Voltage drop over a long distance can be a real problem with the power supplied to your new winch and this distance can also cause over heating of your electrical system if not installed properly.
The longer the wiring is from the battery to the winch the greater the chance of this happening.
Our customized looms eliminate any excess wiring that you need to hide when installing these powerful Viper Winches and lessens the chances of voltage drop and overheating issues.
Once you decide where you are going to mount the Circuit Breaker,Reversing Solenoid and the Up/Down Switch you can get your proper measurements for us to price and make your loom.
We have attached a form to the link below which you can download and save to your computer which you can then fill out and email it to us  so we have the proper details available to quote and manufacture your new wiring loom.
All information and details required are available on this form.

 Viper "Pro Series II" 1000 Electric Drum Anchor Winch

Chain Sock 

 

CLICK HERE TO DOWNLOAD YOUR WIRING LOOM FORM

 


  

 


 

Browse more in Electric Anchor Winches category

Logo
 Powered by IXXO Multi-Vendor
 

My Profile

Product Search

Product Bestsellers

Jigskinz

Click the image below to read more

Jigskins

 

Cart Summary

Cart is Empty

Checkout

  • Edit Cart
  • Billing and Shipping Information
  • Shipping Method
  • Review & Payment
  • Finish

Product Manufacturers



 

Subscribe

Email Address :
Click here to unsubscribe

Accepted Payments

accepted payments

 

Contact Us

Available 7 days a week.

Located In Brisbane.

Phone: 0423235291

+61423235291

Email:  reeltackle@live.com